Quantum Scalar i6000 User Manual page 400

Chapter 10: Path Failover
Configuring Data Path Failover
382
4 In the ADPF column, click the check box of the drive(s) on which you
want to enable or disable Advanced Data Path Failover.
Your choices are indicated by the following colors:
• Green - Added
• Yellow - Removed
• Teal - Changed
• White - Unchanged
5 Click OK. An Operation in Progress dialog box appears.
6 When Advanced Data Path Failover configuration is complete, click
OK.
Note: Unless a drive is configured for control path failover, drives can
enable either BDPF or ADPF within the same partition.
Quantum Scalar i6000 User's Guide