Quantum Scalar i6000 User Manual page 537

Name
RCU version
CMB version
Library UpTime
Quantum Scalar i6000 User's Guide
ID
The RCU serial
number
The CMB serial
number
The library serial
number
Robots Tab
The Robots tab displays the following information for each robot in the
library:
• Name — Left or Right (if only one robot, this will be Left).
• Status — Unknown, Good, Not Installed, Initializing, Failed and
• State — Varied On or Varied Off.
• Serial number — Robot serial number.
• Version — Robot firmware version.
• Generation — Hardware generation (Gen 1 or Gen 2).
• Parked — Indicates whether robot is in its parking space (Yes or
No). If the robot is Gen 1, this will display as N/A.
• V Motion — Total number of meters of vertical motion traveled by
this robot.
• H Motion — Total number of meters of horizontal motion traveled
by this robot.
• Media Moves — Total number of media move operations
performed by this robot.
Drives Tab
The Drives tab displays the following information about the library/
partition being viewed:
• Serial Number — The serial number of the drive
Status Description
The current status of the RCU
(Good, Degraded, or Failed).
For each CMB that is present, the
current status of the CMB (Good,
Degraded, or Failed).
The amount of time that the
library has been up (in days,
hours, minutes, and seconds).
Chapter 15: Maintaining Your Library
Monitoring the Library
Version
Current Firmware
Version
Current Firmware
Version
N/A
.
.
N/A
519