Working With Cartridges And Barcodes - Quantum Scalar i6000 User Manual

Quantum Scalar i6000 User's Guide
Working With Cartridges
The Library Management Console (LMC) simplifies cartridge loading and
unloading, importing and exporting, and moving and inventory
operations. The maximum library can be configured to accommodate
from 100 LTO cartridges to 7,146 LTO cartridges (for a single-robot
library) or 7,224 LTO cartridges (for a dual-robot library). For libraries
containing high-density expansion modules, the maximum capacities
are 12,006 LTO cartridges (for a single-robot library) or 11,760 LTO
cartridges (for dual-robot libraries) for the following drive types:
Note: A library with Gen 2 hardware does not support DLT tape drives
and media.
• SCSI or Fibre LTO-1
• SCSI or Fibre LTO-2
• Fibre LTO-3
• Fibre LTO-4
• Fibre LTO-5
• Fibre LTO-6
• Fibre LTO-7 (IBM only)
Every partition in the library must contain at least one cleaning
cartridge.
This chapter consists of the following sections:
Chapter 16
and Barcodes
689