Quantum Scalar i6000 User Manual page 267

Quantum Scalar i6000 User's Guide
• Select Custom to change screen saver settings such as
activation, movement, or images.
• Select Off to disable the screen saver. (The current settings are
cleared.)
If you selected Custom, go to
3 Under Activation, enter a value in the Wait box to specify how
much idle time must pass before the screen saver is activated.
The activation wait time can be 1 – 120 minutes.
4 Under Movement, specify the position and the motion of the
screen saver image on the screen.
• Select Random to display the screen saver image in a variety of
positions.
• Select Stationary to display a static screen saver image that
does not move.
• Select Linear to display the screen saver image as a floating
image.
• Enter values in the horizontal and vertical boxes to specify the
movement of the screen saver image in pixels.
• Enter a value in the Motion Delay box to specify the movement
speed of the screen saver image.
5 Under Images, specify the image files to display for normal
functions, warning notices, and failure notices. You must select
image files for all three functions.
• To specify an image file, click Browse. Select the image file and
then click Open. The image file must be in GIF, JPEG, or PNG
format, and cannot be larger than 1 MB. In addition, image
resolution is limited to 600 x 800 pixels.
• Click Preview to preview an image file.
6 Click OK to save the settings and close the Preferences dialog box.
Or click Apply to save the settings without closing the Preferences
dialog box.
7 Because you made system configuration changes, you are prompted
to save the configuration changes. For more information, see
and Restoring Library Configuration
Chapter 3: Configuring Your Library
Configuring Screen Saver Preferences
Step 3. Otherwise, go to
on page 601.
Step 6.
Saving
249