Managing and Moving Media
Importing Cartridges
Into Partitions
Quantum Scalar i6000 User's Guide
The LMC provides you with commands for:
•
Importing Cartridges Into Partitions
•
Exporting Cartridges From Partitions
•
Loading Drives
on page 700
•
Unloading Drives
•
Moving Media Within a Partition
•
Moving Media Between Active Vault or AMP and Standard Partitions
on page 704
•
Taking Inventory
The following sections provide step-by-step instructions for performing
these tasks.
Note: Unless the situation requires it, use the host application to
move, load, unload, import, or export cartridges instead of
doing so through the LMC. Using the host to move media
makes sure that the host's view of the library remains in sync
with the library's actual configuration.
Exception: When moving media into and out of library
managed partitions, you must use the LMC since library
managed partitions are not visible to hosts (see
Between Active Vault or AMP and Standard Partitions
page 704).
When you first start using your library, open the door and manually
insert, directly into storage slots, as many cartridges as you plan to use.
The cartridges will not go back all the way if they are inserted
incorrectly.
After your library begins operation, use the Import Media dialog box to
add cartridges without interrupting library operations. Place cartridges
in the I/E station. The scanner automatically reads the barcodes on new
cartridges.
Chapter 16: Working With Cartridges and Barcodes
on page 697
on page 699
on page 702
on page 703
on page 706
Managing and Moving Media
Moving Media
on
697