Quantum Scalar i6000 User Manual page 281

To...
Enable Active Vault policy
Modify existing Active Vault
policy
Quantum Scalar i6000 User's Guide
2 Click Next. The Select the Active Vault Configuration Option
screen appears.
3 Create, modify, or remove policies on a standard partition by doing
one of the following:
Do this...
1 Select Enable.
2 Select a partition from the table that has Active Vault policies
disabled.
3 Proceed to Step
1 Select Modify.
2 Select a partition from the table that has Active Vault policies
enabled.
3 Proceed to Step
4.
4.
Chapter 4: Active Vault
Configure Active Vault
263