Loading and Reloading Advanced Reporting Data ...4 Configuring the Drive Resource Utilization Report Configuring the Media Integrity Analysis Report Saving and E-mailing Advanced Reporting Data Creating and Using a Template Deleting Advanced Reporting Data Document 6-01894-02 October 2008 Scalar i500 Advanced Reporting Instructions...
Page 2
Quantum, the Quantum logo, and the Scalar are all registered trademarks of Quantum Corporation. LTO is a trademark of Quantum, IBM, and HP in the USA and other countries. Other trademarks may be mentioned herein which belong to other companies.
Save or e-mail the report data. Delete the data in the Advanced Reporting log files. from the operator panel. Setup > Licenses Advanced Reporting Features Scalar i500 Advanced Reporting Instructions Document 6-01894-02 October 2008 http://www.quantum.com/ from the web Setup > License...
Scalar i500 Advanced Reporting Instructions Document 6-01894-02 October 2008 Using the Reports and Understanding the Data Report data is collected and displayed in a specific manner. The following notes will help you interpret the reports. • • • • •...
• Selected Partition — The report chart is based on an individual partition in the physical library. Note: Refer to the Scalar i500 User’s Guide for an explanation of the location coordinates. 3 Click Next The report is generated and appears on the screen.
4 To use a saved template, select the template from the drop-down menu and click Load 5 To delete a template, select the template from the drop-down menu and click Saving and E-mailing Advanced Reporting Data Scalar i500 Advanced Reporting Instructions Document 6-01894-02 Save E-mail figure button.
Scalar i500 Advanced Reporting Instructions Document 6-01894-02 October 2008 Deleting Advanced Reporting Data In some circumstances, you may wish to delete the data contained in the library log files used to build the advanced reports. To do this, click the section of either report configuration page.