Quantum Scalar i6000 User Manual page 573

Quantum Scalar i6000 User's Guide
• To search for a specific cartridge according to the cartridge's
barcode, select the Media ID filter, type the barcode in the
Media ID field, and then click Show.
The Module dialog box displays the specific cartridge
highlighted in red within the module where it is located.
• To search for a specific cartridge according to the element
address, select the Element Address filter, type the element
address in the field, then click Show. You must be in
partition view to filter using the Element Address.
• In the Select Module area, you can select a specific module in
your library to view. On a multi-module library, all modules are
represented.
• In the Select Module area, click on the module you want to
view. The Module dialog box displays the current
configuration of Rack one and Rack two (Door - Inside view)
according to the module you chose.
Note: The Rack two (Door - Inside view) view is MIRROR
image of the outside view, so I/E station B is on the
left, and I/E station A is on the right.
• If you click the Partition View button, the graphical display
opens at the left-most module. The upper portion of the screen
displays a legend showing which colors represent each
partition. You can use the right/left arrows at the bottom of the
screen to scroll through all library modules.
Chapter 15: Maintaining Your Library
Maintenance Actions
555