Chapter 3: Configuring Your Library
Configuring Fibre Channel I/O Blades
Note: If a partition is already presented via Control Path it will
not show up in the list of internal LUN devices.
5 Compare the default view with the Show Details view shown in the
following figure. To change from the default view to the detailed
view, see
Setting the View for the FC Host Device Column
on
page 215.
In this figure, the Internal LUN column has been scrolled down. The
Show Details view for partitions shows the partition name, product
ID, vendor ID, and the serial number of the partition. For drives, the
LMC displays the device LUN, connection type, port connection,
vendor ID, serial number, and the associated partition.
The following table describes the descriptors that appear in the
Show Details view for partitions.
Quantum Scalar i6000 User's Guide
211