Quantum Scalar i6000 User Manual page 168

Chapter 3: Configuring Your Library
Working With Partitions
150
Make sure that you select the appropriate module because the
library can have drives in the control module and in any of the
expansion modules.
10 You can add a drive to the partition by selecting the appropriate
drive check box. You can delete a drive from the partition by
clearing the drive's check box. You can identify a drive by its serial
number and location coordinates.
11 To continue, click Next. The Partitions - Step 4: Select Storage
Slots dialog box appears.
12 Select the rack you want to modify.
13 You can add a storage magazine by selecting the appropriate check
box. You can delete a storage magazine by clearing its check box.
You can identify a storage magazine by its location coordinates.
14 If this is a standard partition and Automated Media Pool (AMP) is
configured on the library, you can add virtual storage to the
partition for possible use later by adding magazine extensions. Type
the number of magazines to add in the Magazine Extensions field.
For more information, see
Partitions on page 276.
Create Magazine Extensions in Standard
Quantum Scalar i6000 User's Guide