Kmip-Compliant Encryption Key Management; Fips-Certified Encryption Solution - Quantum Scalar i6000 User Manual

KMIP-compliant Encryption Key Management

FIPS-Certified Encryption Solution

Quantum Scalar i6000 User's Guide
You can only configure the encryption settings through the Setup >
Encryption > Partition Configuration functionality.
The Key Management Interoperability Protocol (KMIP) is a specification
developed by OASIS®. Its function is to standardize communication
between enterprise key management systems and encryption systems.
With version i8.2.1, the Scalar i6000 provides a KMIP version 1.0
compliant encryption solution.
KMIP is only supported in certain environments. Contact your Quantum
representative for details.
Details about the Scalar i6000 KMIP-compliant implementation include:
• As with other encryption systems supported by the library, in order
to use KMIP-compliant encryption systems with the Scalar i6000,
you must have an Encryption Key Management license installed on
the library.
• A minimum of two KMIP-compliant encryption servers are required
for failover purposes. A total of 10 KMIP-compliant encryption
servers are allowed, for increased failover capability.
See Encryption Key Management Systems
on how to configure KMIP-compliant encryption systems on the library.
FIPS (Federal Information Processing Standard) 140-2 is a U.S.
government standard relating to computer security and encryption.
The Quantum Scalar i6000 now offers a FIPS 140-2 Level 1 certified
encryption solution composed of the Scalar Key Manager and HP LTO-5
and laterFibre Channel tape drives in a Scalar i6000 library. FIPS mode
can be enabled on the HP LTO-5 and later tape drives via the library user
interface. Once in FIPS mode, all encryption key communication
Chapter 8: Encryption Key Management
KMIP-compliant Encryption Key Management
on page 287 for instructions
289