Quantum Scalar i6000 User Manual page 646

Chapter 15: Maintaining Your Library
Maintenance Actions
628
box, select the type of inventory list that you want to see (Library,
Drive, or Blade).
Library Inventory
This inventory list provides the following statistics and information:
• Library serial number
• Library firmware version
• Library WWN base
• Count for frame, tower, drives, I/E magazine, storage magazine,
LGR, IEX, LMD, CMB, EEB, LSC, MCB, and FCB
• Serial number for frame, tower, power supply, LMD, EEB, IEX, FCB,
CMB, MCB, and LSC
• Application firmware version for EEB, FCB, CMB, MCB, KGR, and LSC
• Boot firmware version for CMB, MCB, LGR, and LSC
• Pip firmware version for CMB and MCB
• Number of cartridges, I/E stations, frames, towers, drives, and aisles
Note: If an inventory is performed that includes a varied off tower,
you will receive a warning message allowing you to continue
with the inventory or cancel the request so the tower can be
varied on. If you continue, the tower will not be included in the
results of the inventory.
Drive Inventory
This inventory list provides the following information about each drive:
• Drive type
• Type of interface
• Physical serial number
• Logical serial number
• Firmware version
• Sled serial number
• Sled application firmware version
• Sled boot firmware version
Quantum Scalar i6000 User's Guide