Quantum Scalar i6000 User Manual page 479

Figure 50 Aisle, Module, and
Rack Numbering Locations
racks 1 and 2
Quantum Scalar i6000 User's Guide
Note: Column 1 of a single-robotics control module never contains
storage. Column 1 of a dual-robotics control module can
contain storage.
Note: The cartridges in the 24-slot LTO I/E station are addressed as
part of column 3 and are in sections 1 through 4 (top to
bottom). When you have an I/E station installed on rack 2,
there are no cartridges in columns 3 and 4 of section 5. See
Figure 52 on page 463.
Note: In Figure 52
4, sections 6-10 do not exist in a single-robot control module.
However, these magazines exist in expansion modules.
Figure 50 shows aisle, module, and rack numbering.
Figure 51 on page 462 shows section, column, and row numbering for
rack 1 of a library that contains LTO cartridges.
Figure 52 on page 463 shows the section, column, and row numbering
for rack 2 of a library that contains LTO cartridges.
Figure 53 on page 464 shows examples of location coordinates.
back of modules
front of modules
Understanding Location Coordinates
on page 463, the five magazines shown in column
Chapter 13: Running Your Library
modules 1 through 4
(from left to right)
aisle value
is always 1
461