Quantum Scalar i6000 User Manual page 361

Quantum Scalar i6000 User's Guide
• The EDLM library managed partition must be configured on the
library (see Step 1: Creating the EDLM Library Managed Partition
page 330).
• The cartridge you want to scan must be capable of being read by a
tape drive in the EDLM library managed partition.
• The cartridge can be located in any partition, including the EDLM
library managed partition.
• The cartridge must be located in a storage slot, not in a drive or I/E
station.
To run a manual EDLM test, do the following:
1 Log on as an administrator.
2 From the View menu, select the physical library or a partition on
which EDLM policies are enabled.
3 From the main menu, select Tools > EDLM > Test Selection. The
EDLM Test screen appears.
Chapter 9: Extended Data Lifecycle Management
Running Manual EDLM Tests
on
343