Using The Library Access Feature - Quantum Scalar i6000 User Manual

Chapter 13: Running Your Library

Using the Library Access Feature

Available Menu Commands When Robotics Become Disabled
Tools > Drives
Tools > Connectivity
Tools > Capture Snapshot
Tools > Save/Restore
Tools > Verification Tests
Tools > Command History Log
View > [physical library name] (Physical)
View > [partition name] (Partition)
View > Views
Help > Index
Help > About
Using the Library Access Feature
492
The Library Access Wizard provides a 10-minute window for you to open
the library and perform maintenance activities while reporting a status
of "Becoming Ready" to hosts. (If you simply pressed the Robotics
Enabled button and opened an access door, the library would report
"Not Ready" to hosts).
The wizard includes a timer that counts down from 10 minutes. After 10
minutes, the library will go "Not Ready" and hosts will start failing jobs.
The 10-minute window includes the time it takes the library to finish the
current command, your time working in the library, and time for the
library to come ready after you have finished. Since it may take 3 to 4
minutes for the library to come ready, plan your time inside the library
to be as short as possible.
After Before
Discovery Discovery
X
X
X
X
X X
X X
X X
X
X X
X X
X X
Quantum Scalar i6000 User's Guide