Quantum Scalar i6000 User Manual page 262

Chapter 3: Configuring Your Library
Using LDAP
244
certificate from the LDAP servers. If you use secure LDAP,
both LDAP servers specified above MUST use the same
trusted root.
• Port: Enter the appropriate port in this field.
• Retrieve TR: Use this function to retrieve the trusted root
certificate from the primary LDAP server. An MD5 and SHA1
hash is shown to verify the LDAP's server identity.
Note: The first time you use Retrieve TR, the process can
take 5 to 10 minutes. To connect to a secure LDAP
server, you must complete the retrieval process.
Note: This button is only enabled if the Secure check box
is selected. Some directory servers (for example,
Novell eDirectory
• Search Information section:
• Administrative user rights are not required, but the user
must have the right to search for all needed user names in
the LDAP directory.
TM
) are secure only by default.
Quantum Scalar i6000 User's Guide