Quantum Scalar i6000 User Manual page 674

Chapter 15: Maintaining Your Library
Maintenance Actions
656
Mailing, Saving, and Printing Test Logs
The Send button on the Text tab on the report window enables you to
send a verification test log to e-mail addresses. If you are accessing the
LMC from a remote client, Send also enables you to save the log to a file
or print it.
Note: You can mail, save, or print verification test logs from a remote
client. However, you cannot save or print logs from the library's
touch screen.
The information that is sent will be the same as what the Text tab
appears at the time that you click Send.
Note: Before you perform the following procedure, you must make
sure that e-mail is appropriately configured in the LMC so that
the library can send logs to the recipient. See
mail on page 187.
1 Make sure that the Text tab on the report window displays the log
that you want to send.
2 Click Send. The Email, Save or Print dialog box appears.
3 Perform one of the following tasks:
• To indicate that you want to send the log as an e-mail message
to a recipient, select Email, and then either type an e-mail
address in the Email text box or select an existing address from
the drop-down list. You can type a comment in the Comment
text box to send with the log.
Configuring E-
Quantum Scalar i6000 User's Guide