About The Configuration Record - Quantum Scalar i6000 User Manual

Tape library

Hide thumbs Also See for Scalar i6000:

Table of Contents

Chapter 3: Configuring Your Library

About the Configuration Record

6 In the Enter new Interval text box, type the amount of time that

should elapse between automatic monitoring checks. The interval

can range from 1 to 2,880 minutes (48 hours). The default interval is

Note: The data path from I/O blade to the drive must experience

problems for two period intervals before a problem is

detected and a ticket is generated.

7 To save your configuration and return to the Datapath

Conditioning dialog box, click OK.

The configuration record contains details about the library's

configuration and can be sent to a specified e-mail address or saved as

Information in the configuration record includes:

• Product information — Product name and version, MCB and RCU

versions, serial number, and modules/drives/partitions

configuration

• License information — License descriptions, quantities, and

installation dates

• Network information — Hostname, DHCP status, IP address, and IP,

Netmask, and Gateway addresses

• Partition information — Serial numbers, online/offline statuses, and

numbers of slots, drives, and I/E slots

• Drive information, for each drive — Location, partition, SCSI

element address, online/offline status, vendor, model, serial number,

logical serial number, firmware version, drive type, and interface

• SCSI tape drives — SCSI ID

• Fibre Channel (FC) tape drives — World Wide Name (WWN) and

loop ID, speed, and connection type

Quantum Scalar i6000 User's Guide

Show Quick Links

Table of Contents