Chapter 3: Configuring Your Library
Setting Up Policies for the Physical Library
Setting Up Policies for the Physical Library
180
Note: If the target port state is offline, the port's connection has not
been repaired. The error condition that caused the port to fail
still exists.
On the FC Host Port Failover dialog box, click the Physical Ports
tab. The dialog box shows you each target port on the I/O blade, the
port's state, and the type of failure that has occurred, if applicable.
11 Click the port you want to enable.
12 Click Enable.
Note: Enable is available only if the port is disabled.
13 To return to the main FC Host Port Failover dialog box, click Close.
The Physical Library dialog box enables you to configure various
operating modes:
Quantum Scalar i6000 User's Guide