Quantum Scalar i6000 User Manual page 306

Chapter 8: Encryption Key Management
Encryption Key Management Systems
Encryption System
Quantum Encryption Key Manager (Q-
EKM)
Scalar Key Manager (SKM)
KMIP-compliant key management (see
KMIP-compliant Encryption Key
Management on page 289).
288
Encryption Key Management features described in this chapter. For
more information on licensing, see
Step 1 — Installing the EKM License Key
The Scalar i6000 supports four encryption key management systems:
Supported Tape Drives
IBM LTO-4 Fibre Channel
IBM LTO-5 Fibre Channel
IBM LTO-6 Fibre Channel
HP LTO-4 Fibre Channel
HP LTO-5 Fibre Channel
HP LTO-6 Fibre Channel
IBM LTO-5 Fibre Channel
IBM LTO-6 Fibre Channel
IBM LTO-7 Fibre Channel
HP LTO-4 Fibre Channel
HP LTO-5 Fibre Channel
HP LTO-6 Fibre Channel
IBM LTO-5 Fibre Channel
IBM LTO-6 Fibre Channel
IBM LTO-7 Fibre Channel
Note: The library does not support using more than one encryption
key management system on a single library.
Encryption on the Scalar i6000 tape library is enabled by partition only.
The default setting for encryption-capable drives permits external
application-managed encryption support on all encryption-capable tape
drives and media within a partition.
You cannot select individual drives for encryption; you must select an
entire partition to be encrypted. If you encrypt a partition, all
encryption-capable tape drives are enabled for encryption, and all data
written to supported media is encrypted. Non encryption-capable tape
drives will not be enabled for encryption, and non-supported media will
not be encrypted.
Enabling Licenses on page 125 or
on page 293.
Supported Media
IBM LTO-4, LTO-5, and
LTO-6
HP LTO-4, LTO-5 and
LTO-6
IBM LTO-5, and LTO-6
LTO-7
HP LTO-4, LTO-5, and
LTO-6
IBM LTO-5, LTO-6 and
LTO-7
Quantum Scalar i6000 User's Guide