8
9
10
Saving a Frame Memory Clip With Ancillary Data
1
2
3
4
42
Installation and Device Setup (Install/Unit Config Menu)
Press [Install].
The "Install" box shows "On," confirming that this is to be installed. To
cancel this installation setting, press "Install" once more, making the box
blank.
To carry out the installation, press [Execute].
A confirmation message appears.
Select [Yes].
This carries out the installation, and when it completes normally, the
"Install" box shows "OK."
In the System >Install/Unit Config menu, select [SWRx], and press [Unit
Config].
The Unit Config menu appears.
Press [FM Ancillary], turning it on.
On: Save with ancillary data.
Off: Save without ancillary data.
Note
Enabling this selection by pressing [Execute] in the following step
reinitializes all frame memory data. Make backups of required data
beforehand.
Press [Execute].
A popup window appears, displaying a message.
Check the message, and select [Yes].