Multi Program 2 Mode Restrictions - Sony XVS-9000 User Manual

Item
DME wipes Use
Patterns for 1 channel
Patterns for 2 channels
Patterns for 3 channels
Backgrounds
Modifiers
Transitions Key priority
Transition preview
Preset color mix
Snapshots Cross-point hold
a) Key 2 to key 8 are common on both main and sub.
Notes
• Allow a transition to complete before carrying out main
and sub delegation switching.
• The sub bank background A bus (utility 2 bus) is shared
with wipe edge border fill. Making a change to one
affects the other.
• Even if the wipe border width is set to the same numeric
value for main and sub, the same image is not obtained.

Multi Program 2 Mode Restrictions

• The following functions are not available on the sub
bank.
- Data copy and swap
- Default recall (except for parametric recall)
- [AUTO PVW] button (button assigned with the "Auto
Preview" utility command)
- Split fader
• Re-entry is limited to four levels. Re-entry is not
possible between main and sub on the same M/E.
However, this restriction can be removed.
For details, see "Enabling re-entry between main and
sub" (page 202).
• In the following cases, a transition using the fader lever
may not be performed correctly:
- When the main and sub bus toggle modes are set
differently
- For a pattern mix, preset color mix, and so on
• For an Internal bus link or External bus link, the "Utility
2" bus cannot be selected.
• Show key and [MACRO ATTACH ENABLE] button
settings are common to main and sub.
• If a snapshot is recalled simultaneously for main and sub
or a keyframe is executed simultaneously for main and
Main
Supported
Main and sub can be used separately.
Only one of main and sub can be used.
For each M/E, the number of DMEs that can be used is the same as in
standard mode.
Wipe edge fill matte (including
color mix and other settings in the
Matte Adjust menu)
Same as standard mode
Not supported
Not supported
Color matte or video signal
selected on the utility 2 bus
Utility 2 cannot be set
sub, then the settings on the main bank are reflected in
the following shared data on main and sub.
- Keys
- M/E Config
- DME external video bus and utility 1 bus
• When a macro attachment is set on the DME utility 1 bus
or DME utility 2 bus, it is not possible to make separate
main and sub settings.
• When snapshots with different M/E Config settings are
recalled:
- If M/E Config data is not to be included in the snapshot
data, the current system settings are used for snapshot
reproduction.
- If M/E Config data is to be included in the snapshot
data, first M/E Config data is set and then other
snapshot data is recalled.
• The bus override function is only available on the
following buses:
- M/E-1 to M/E-5 Main BKGD A/B buses
- M/E-1 to M/E-5 Sub BKGD A/B buses (Util 2, Util 3
bus)
- P/P Main PGM/PST bus
- P/P Sub PGM/PST bus (Util 2, Util 3 bus)
• When a master snapshot or master timeline is executed
with a key assigned to both main and sub, it is uncertain
which data will be reflected.
• When recalling a master snapshot with different register
numbers for main and sub, the recall timing may differ
by one field or more between main and sub.
• The link state is maintained even when M/E Config is
changed. Set the link setting again, as required.
• Since key 2 to key 8 are shared between main and sub, if
the main and sub fader lever positions are different and
you move the fader lever, the video changes
instantaneously to the value of the most recently moved
fader lever.
204
Sub
Cannot be used (Can be used, with a
setting change)
Wipe edge fill matte (single color only)
Wipe border colors are single color only
Color matte only
• Utility 3 is added.
• BKGD A/B and Key1 cannot be set.