Rotation Settings; Virtual Image Cancelation; Interpolation Settings; Crop/Border Settings - Sony XVS-9000 User Manual

To clear all of the parameters in the work buffer and reset
the resizer, press the [CLR WORK BUFR] button twice in
rapid succession.
For the default state, you can select either the factory
default settings or user settings.
For details, see "Power-On (Startup) State Selection"
(page 391).
To reset the bank to the default state
Press the [M/E DEF RCALL] button twice in rapid
succession to return the currently selected bank (M/E or
PGM/PST) to the default state.

Rotation Settings

Note
Select either X or Y direction for rotation. You cannot
make rotation by combining both directions.
1
In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2
In the <Resizer Effect/Rotation> group, press
[Rotation].
The Rotation menu (1115.5) appears.
3
In the <Rotation> group, select the direction of
rotation.
X: Horizontal rotation
Y: Vertical rotation
4
Set the following parameters.
When [X] is selected
No. Parameter Adjustment
1 Rotation X Horizontal key rotation
4 Perspective Perspective
When [Y] is selected
No. Parameter Adjustment
2 Rotation Y Vertical key rotation
4 Perspective Perspective

Virtual Image Cancelation

If an extreme degree of perspective is set for an image, the
part of the image exceeding the virtual view point is
displayed wrapped around on the monitor screen. This is
referred to as a virtual image.
You can make a setting so as not to show the virtual
images.
1
In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2
In the <Resizer Effect/Rotation> group, press
[Rotation].
The Rotation menu (1115.5) appears.
3
Press [Wrap Around], turning it on.

Interpolation Settings

1
In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2
In the <Resizer Effect/Rotation> group, press [Resizer
Process].
The Resizer Process menu (1115.3) appears.
3
Select an interpolation method.
Set the interpolation settings in the same way as for the
DME interpolation settings.
For details, see "Interpolation Settings" (page 270).

Crop/Border Settings

Setting cropping (menu)
1
In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2
In the <Resizer Effect/Rotation> group, press [Border/
Crop].
The Border/Crop menu (1115.1) appears.
3
Press [Crop], turning it on.
4
Set the parameters.
Set the crop settings in the same way as for the DME
crop settings.
For details, see "Crop Settings" (page 228).
Note
Enabling mosaic or defocus in the M/E-1 >Key1 >Resizer
>Enhanced Effect menu (1115.2) and selecting [Video/
Key] in the <Mosaic/Defocus Mode> group disables
cropping.
131