For the initial state, you can select either the factory default settings or user
settings.
For details of how to make this selection, see "Selecting the State After
Powering On (Start Up Menu)" in Chapter 16 (Volume 2).
Resizer Interpolation Settings
For example, to make the interpolation settings for key 1 of the M/E-1 bank,
use the following procedure.
1
In the M/E-1 >Key1 >Processed Key menu, press [Resizer], turning it on.
This enables the resizer function.
2
Press [Resizer Process].
The Resizer Process menu appears.
3
In the <Video Field/Frame Mode> and other groups, make the
interpolation settings.
These settings are the same as those for input video signals. For details,
see "Interpolation Settings" in Chapter 11 (Volume 2).
Resizer Crop/Border Settings
Making a crop setting for a key for which resizer is on
For example, to make the crop settings for key 1 of the M/E-1 bank, use the
following procedure.
1
In the M/E-1 >Key1 >Processed Key menu, press [Resizer], turning it on.
This enables the resizer function.
2
Press [Border/Crop].
The Border/Crop menu appears.
3
Press [Crop], turning it on.
This enables the adjustment of crop.
377
Resizer