Ack Nak Retry Count - Datalogic Magellan 1500i Product Reference Manual

Enter/Exit Programming Mode
RS-232 ACK NAK Retry Count
This feature sets the number of times for the scanner to retry a label transmis-
sion under a retry condition.
To set the RS-232 ACK NAK Retry Count:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. The scanner will automatically exit Programming Mode when the appro-
DEFAULT
94
Set RS-232 ACK NAK Retry Count
cover any unused barcodes on this and the facing page to ensure that the
scanner reads only the barcode you intend to scan.
that represent the desired number. The selectable range is 000-255
resets. Pad all single and double digit numbers with leading zeroes to yield
a three-digit entry (000-255).
A setting of 255 specifies "retry forever."
NOTE
priate amount of digits have been scanned.
RS-232 ACK NAK Features
below. You'll need to
Alpha-Numeric Keypad in Appendix C
0608(CR)
Set RS-232 ACK NAK Retry Count
Default setting for this feature is:
003 - Three retrys
Magellan™ 1500i