Interface Type - Datalogic Magellan 1500i Product Reference Manual

INTERFACE TYPE

Specifies the current scanner interface.
NOTE
NOTE
CAUTION
NOTE
INTERFACE SELECTION
The correct interface cable is generally included for the reader interface
type you ordered.
If the scanner's interface type must be changed, always be sure that inter-
face configuration is the FIRST item scanned during a programming ses-
sion. (Selecting an interface type resets ALL other configuration items to
the factory default for that interface type.)
Great care should be taken to select the correct interface type, since you
can cause damage to the scanner and/or POS terminal by attempting to
change to an incompatible interface. ALWAYS make interface selections
with the host cable DISCONNECTED.
When an interface is selected, the scanner loads the configuration for that
interface as the selection is made. Any custom configurations done in the
previous interface will not be carried over to the configuration for the new
interface.
PRODUCT REFERENCE GUIDE
75