Scanner Control Button Options - Datalogic Magellan 1500i Product Reference Manual

Enter/Exit Programming Mode

Scanner Control Button Options

Configure the Scanner Control Button to one of the following modes of opera-
tion:
•
•
•
•
To set the desired Scanner Control Button Option:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
05AF01(CR)
Scanner Control Button = Enable Only Volume Tone and Reset
05AF03(CR)
Scanner Control Button = Disable All Functions
36
Enable all functions: Volume, tone, diagnostics and reset.
Enable only volume, tone and reset.
Enable reset only.
Disable all button functions
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
Scanner Control Button Options
05AF00(CR)
Scanner Control Button = Enable All Functions
DEFAULT
05AF02(CR)
Scanner Control Button = Enable Reset Only
Magellan™ 1500i