Appendix F Host Commands; Accepting Rs-232 Commands - Datalogic magellan 3300HSI Product Reference Manual

Accepting RS-232 Commands

The scanner responds to the following RS-232 commands:
COMMAND
Enable Scan-
ner
Disable
Scanner
Reset Scanner
Not On File
Indication
Beep Good
Read Tone
Force Good
Read Tone
Identification
request
Health request
Status request
If one of the above commands is received, the scanner will perform the steps indicated for the command. Host
commands for other interfaces are also available. Contact Tech Support for more details.
Also see the section "Image Capture to the Host by Host Command" on page 32
Product Reference Guide
ASCII
E
D
R
F
B
!
i
h
s
1. Call Tech Support for information.
HEX COMMENT
0x45
0x44
0x52
0x46 Long series of beeps
0x42 Beeps if Good Read Beep is
enabled
0x01 Beeps regardless of beep setting
0x69
Returns long response
0x68
Returns long response
0x73
Returns long response
Appendix F
Host Commands
1
1
1
for details concerning that feature.
175