Aztec Length 1, Length 2 Programming Instructions - Datalogic Magellan 9800i Product Reference Manual

Aztec Length 1, Length 2 Programming Instructions

If Aztec Length Control is set to Fixed-Length decoding, this feature specifies Aztec first fixed
length. If Aztec Length Control is set to Variable-Length decoding, this feature specifies the
minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
any unused barcodes on this and the facing page to ensure that the scanner reads only the
bar code you intend to scan.
3. Scan the appropriate digits from the
label length. The selectable range for this option is 0001 to 3700. Pad all numbers with
leading zeros to yield a four-digit entry (0001-3700).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
Default setting for this feature = 0001
0434(CR)
Set Aztec Length 2
Product Reference Guide
Length 1 is the minimum label length if in variable length mode, or
the first fixed length if in fixed length mode. Length 2 is the maxi-
mum label length if in variable length mode, or the second fixed
length if in fixed length mode. Length includes the barcode's data
characters only. Any value > 3700 will be considered to be 3700.
NOTE
Set Aztec Length 1
Enter/Exit Programming Mode
Set Aztec Length 2
or
Keypad Appendix C
in that represent the desired
0433(CR)
Set Aztec Length 1
Default setting for this feature = 3700
below. You'll need to cover
387