Micro Qr Code Length 1, Length 2 Programming Instructions - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode

Micro QR Code Length 1, Length 2 Programming Instructions

If Micro QR Code Length Control is set to Fixed-Length decoding, this feature specifies Micro
QR Code first fixed length. If Micro QR Code Length Control is set to Variable-Length
decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Default setting for this feature = 0001
042C(CR)
Set Micro QR Code Length 2
384
Length 1 is the minimum label length if in variable length mode, or
the first fixed length if in fixed length mode. Length 2 is the maxi-
mum label length if in variable length mode, or the second fixed
length if in fixed length mode. Length includes the barcode's data
characters only. Any value > 3700 will be considered to be 3700.
NOTE
Set Aztec Length 1
to cover any unused barcodes on this and the facing page to ensure that the scanner reads
only the bar code you intend to scan.
label length. The selectable range for this option is 0001 to 3700. Pad all numbers with
leading zeros to yield a four-digit entry (0001-3700).
Mode bar code.
Set Micro QR Code Length 2
or
Keypad Appendix C
in that represent the desired
042B(CR)
Set Micro QR Code Length 1
Default setting for this feature = 3700
below. You'll need
Magellan™ 9800i Scanner