Msi Check Character Transmission - Datalogic Magellan 9800i Product Reference Manual

Datalogic magellan 9800i sacnner

Hide thumbs Also See for Magellan 9800i:

Table of Contents

Enter/Exit Programming Mode

MSI Check Character Transmission

Enables/disables transmission of optional MSI check characters.

To set this feature:

1. Scan the ENTER/EXIT Programming Mode bar code.

2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes

3. Complete the programming sequence by scanning the ENTER/EXIT Programming

MSI Check Character Transmission = Enable

This feature applies only when

enabled. This item is ignored when the advanced feature, Full Label

Edit, is enabled.

on this and the facing page to ensure that the scanner reads only the barcode you intend to

Mode bar code.

MSI Check Character Calculation

MSI Check Character Transmission = Disable

Magellan™ 9800i Scanner

Show Quick Links

Table of Contents