MSI/Plessey Number of Check Characters
NOTE
440
Specifies number of MSI/Plessey check characters to be calculated
and verified.
Check characters are always modulus 10.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code below representing the desired number of
MSI/Plessey check characters to be calculated and verified.
You'll need to cover any unused bar codes on this and the fac-
ing page to ensure that the scanner reads only the bar code
you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
MSI/PLESSEY NUMBER OF CHECK CHARACTERS = 1
MSI/PLESSEY NUMBER OF CHECK CHARACTERS = 2
Magellan™ 8300/8400