Code 128 Minimum Read - Datalogic Magellan 1500i Product Reference Manual

CODE 128

Code 128 Minimum Read

This feature specifies the minimum number of consecutive Code 128 decodes before is
accepted as good read.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You'll need to cover any unused bar‐
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
006F02(CR)
Code 128 Minimum Read = 2
006F04(CR)
Code 128 Minimum Read = 4
PRODUCT REFERENCE GUIDE
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
Mode barcode.
ENTER/EXIT PROGRAMMING MODE
006F01(CR)
Code 128 Minimum Read = 1
006F03(CR)
Code 128 Minimum Read = 3
213