Databar Limited; Databar Limited Enable - Datalogic Magellan 1500i Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

DATABAR LIMITED

DataBar Limited Enable

Enables/disables the ability of the scanner to decode DataBar Limited labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
DEFAULT
035401(CR)
Databar Limited = Enable
184
MAGELLAN™ 1500I
035400(CR)
Databar Limited = Disable