Enter/Exit Programming Mode
UPC/EAN Stitch Exact Label Halves
This setting enables the stitching of exact UPC-A/EAN-13 label halves with no overlapping
characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused bar codes
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
DEFAULT
054101(CR)
UPC/EAN Stitch Exact Label Halves = Enable
266
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
code.
054100(CR)
UPC/EAN Stitch Exact Label Halves = Disable
Magellan™ 9800i Scanner