UPC-E
Expand UPC-E to UPC-A
Enables/disables expansion of UPC‐E labels to UPC‐A.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar‐
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
DEFAULT
004101(CR)
Expand UPC-E to UPC-A = Enable
PRODUCT REFERENCE GUIDE
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
barcode.
ENTER/EXIT PROGRAMMING MODE
004100(CR)
Expand UPC-E to UPC-A = Disable
137