How It Works; What It Provides - Radwin 5000 HPMP User Manual

How it Works

How it Works
Assume the sector setup, which we used in
nience:
Table 20-1: Preconfigured setup
Unit Location
HBS HBS_10.200
HSU_10.101
HSU
HSU_10.102
On the managing computer, point your browser to192.168.10.200 and log on as shown
below. You can also log on over the air to registered HSUs in the same way.
For stand-alone or unregistered HSUs, you must connect a managing computer directly to the
HSU and again log on as shown below.

What it Provides

The WI is a developing technology. It is possible that the current distributed release may have
additional or slightly different features from those shown here. The description below, should
nevertheless give you a good idea of how to use the WI.
RADWIN 5000 HPMP User Manual
Attribute Value
IP Address 192.168.10.200
Net Mask
255.255.255.0
Default Gateway
0.0.0.0
Sector ID EBG_20560334
Contact Bach
Name Bach's Office
Band 5.730 - 5.845 GHz FCC/IC
Channel Bandwidth 20MHz
IP Address 192.168.10.101
Net Mask
255.255.255.0
Default Gateway
0.0.0.0
Contact Haydn
Name Haydn's Office
IP Address 192.168.10.102
Net Mask
255.255.255.0
Default Gateway
0.0.0.0
Contact Mozart
Name Mozart's Office
Release 3.2.00
Chapter 4 and late. We repeat it here for conve-
Remark
All communicating HSUs and HBS in
the same subnet
Inherited by all communicating HSUs
Optional
Location of Contact - optional
Inherited by all communicating HSUs
Inherited by all communicating HSUs
All communicating HSUs and HBS in
the same subnet
Optional
Location of Contact - optional
All communicating HSUs and HBS in
the same subnet
Optional
Location of Contact - optional
Chapter 20
20-2