Configuration With Telnet; Telnet Access To The Hbs - Radwin 5000 HPMP User Manual

Configuration with Telnet

7. Copy and Paste the license keys into a plain text file and save it to a safe known
place.
8. Open the Configure | Operations tab
ton, navigate to the file you save in the last step.
9. Upon completion of the process, click Activate. The next time you enter the Change
Bands tab, the new bands will be available,
Configuration with Telnet

Telnet Access to the HBS

A Telnet terminal can be used to configure and monitor the RADWIN 5000 HPMP.
To start a Telnet session on the HBS, use telnet <ODU_IP>.
For example, if you run Telnet as follows,
telnet 192.168.10.200
you will be asked for a user name and password.
The Telnet log on user name is the password that you used to enter the RADWIN Manager
(for example, the default:
netman
string (default:
Figure 6-18: Telnet session log on to the HBS
A Read-Only Community string allows you to use display commands only whereas a Read-
Write Community string allows you to use display commands and execute set commands.
RADWIN 5000 HPMP User Manual
admin
). The Telnet password is the corresponding Community
).
Release 3.2.00
(Figure 6-10). Check the License File but-
Chapter 6
6-37