Trigger.model.setblock() — Trigger.block_Log_Event - Keithley 2450 Reference Manual

Section 8: TSP command reference
trigger.model.setblock() — trigger.BLOCK_LOG_EVENT
This function allows you to log an event in the event log when the trigger model is running.
Type TSP-Link accessible
Function Yes
Usage
trigger.model.setblock(blockNumber, trigger.BLOCK_LOG_EVENT, eventNumber, message)
blockNumber
eventNumber
message
Details
This block allows you to log an event in the event log when the trigger model is running. Insert the block into the
trigger model. When the trigger model executes the block, the event is logged.
Note that using this block too often in a trigger model could overflow the event log. It may also take away from
the time needed to process more critical trigger model blocks.
Example
trigger.model.setblock(1, trigger.BLOCK_LOG_EVENT, trigger.LOG_INFO1, "info
message")
Set trigger model block 1 to log an event.
Also see
None
8-208
Model 2450 Interactive SourceMeter® Instrument Reference Manual
Affected by
Restore configuration
Instrument reset
Power cycle
The sequence of the block in the trigger model
The event number:
trigger.LOG_INFON
•
trigger.LOG_WARNN
•
trigger.LOG_ERRORN
•
Where N is 1 to 4; you can define up to four of each type
A string up to 31 characters
Where saved Default value
Configuration script Not applicable
2450-901-01 Rev. B/September 2013