Trigger.blender[N].Clear() - Keithley 2450 Reference Manual

Section 8: TSP command reference

trigger.blender[N].clear()

This function clears the blender event detector and resets the overrun indicator of blender N.
Type TSP-Link accessible
Function Yes
Usage
trigger.blender[N].clear()
N
Details
This command sets the blender event detector to the undetected state and resets the overrun indicator of the
event detector.
Example
trigger.blender[2].clear()
Also see
None
trigger.blender[N].orenable
This attribute selects whether the blender performs OR operations or AND operations.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
orenable = trigger.blender[N].orenable
trigger.blender[N].orenable = orenable
orenable
N
Details
This command selects whether the blender waits for any one event (OR) or waits for all selected events (AND)
before signaling an output event.
8-166
Model 2450 Interactive SourceMeter® Instrument Reference Manual
Affected by
The blender number (1 or 2)
Affected by
Restore configuration
Instrument reset
Power cycle
Trigger blender N reset
The type of operation:
true: OR operation
•
false: AND operation
•
The trigger blender (1 or 2)
Where saved Default value
Clears the event detector for
blender 2.
Where saved
Configuration script
2450-901-01 Rev. B/September 2013
Default value
false (AND)