Smu.measure.limit[Y].High.value - Keithley 2450 Reference Manual

Model 2450 Interactive SourceMeter® Instrument Reference Manual

smu.measure.limit[Y].high.value

This command specifies the upper limit for a limit test.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
highLimit = smu.measure.limit[Y].high.value
smu.measure.limit[Y].high.value = highLimit
highLimit
Y
Details
This command sets the high limits for the limit tests for the selected measurement function. When limit testing is
enabled for this limit, the instrument generates a fail indication when the measurement value is more than this
value.
Example
See the example in
Also see
smu.measure.limit[Y].enable
2450-901-01 Rev. B/September 2013
Affected by
Restore configuration
Instrument reset
Power cycle
Measure configuration list
Function change
The high value; range is −999999000000 to +999999000000
Limit number: 1 or 2
smu.measure.limit[Y].fail (on page 8-107).
(on page 8-106)
Section 8: TSP command reference
Where saved Default value
Configuration script 1.000000E+00
Measure configuration list
8-109