Creating A New Tsp Project - Keithley 2450 Reference Manual

Model 2450 Interactive SourceMeter® Instrument Reference Manual
2. The Select Instrument dialog box opens. Select an existing instrument from the list, or type the
VISA resource ID of the instrument in the Select or enter new instrument box.
3. Click OK. You briefly see the Opening Resource dialog box, and then the instrument is visible in
the Instrument Console.

Creating a new TSP project

To create a new Test Script Processor (TSP
1. On the File menu in the TSP perspective, select New > TSP Project. The New TSP Project
dialog box opens.
2450-901-01 Rev. B/September 2013
Figure 128: Select Instrument dialog box
Figure 129: Instrument connected in TSB
®
) project:
Figure 130: New TSP Project dialog box
Section 7: Introduction to TSP operation
7-33