Section 4: Source-measure considerations
Reset default values
When you turn instrument power on and off or send a reset command, many of the settings in the
instrument are reset to their default values.
The settings that are affected are listed in the following tables. The tables show SCPI, TSP, and front
panel settings for each setting. They are sorted alphabetically by the name of the SCPI command.
Default values
Math and limit reset values
Setting
MENU > Math > Math Function
:CALCulate[1]:<function>:MATH:FORMat
smu.measure.math.format
MENU > Math > b Value
:CALCulate[1]:<function>:MATH:MBFactor
smu.measure.math.mxb.bfactor
MENU > Math > m Value
:CALCulate[1]:<function>:MATH:MMFactor
smu.measure.math.mxb.mfactor
MENU > Math > Percent
:CALCulate[1]:<function>:MATH:PERCent
smu.measure.math.percent
MENU > Math > Math State
:CALCulate[1]:<function>:MATH:STATe
smu.measure.math.enable
MENU > Measure > Settings > Limits > View > Auto
Clear
:CALCulate2:<function>:LIMit<Y>:CLEar:AUTO
13)
smu.measure.limit[Y].autoclear
MENU > Measure > Settings > Limits > Low Value
:CALCulate2:<function>:LIMit<y>:LOWer[:DATA]
6-16)
smu.measure.limit[Y].low.value
MENU > Measure > Settings > Limits > State
:CALCulate2:<function>:LIMit<y>:STATe
smu.measure.limit[Y].enable
MENU > Measure > Settings > Limits > High Value
:CALCulate2:<function>:LIMit<y>:UPPer[:DATA]
6-18)
smu.measure.limit[Y].high.value
4-24
Model 2450 Interactive SourceMeter® Instrument Reference Manual
(on page 6-7)
(on page 8-112)
(on page 6-8)
(on page 8-113)
(on page 6-10)
(on page 8-114)
(on page 6-11)
(on page 8-115)
(on page 6-12)
(on page 8-111)
(on page 6-
(on page 8-104)
(on page
(on page 8-110)
(on page 6-17)
(on page 8-106)
(on page
(on page 8-109)
Default value on
reset
Percent
0
1
1.0
Off
On
1
Off
1
2450-901-01 Rev. B/September 2013