Trace:statistics:maximum; Trace:statistics:minimum - Keithley 2450 Reference Manual

Model 2450 Interactive SourceMeter® Instrument Reference Manual

:TRACe:STATistics:MAXimum?

This command returns the maximum reading value in the reading buffer.
Type
Query only
Usage
:TRACe:STATistics:MAXimum?
:TRACe:STATistics:MAXimum? <bufferName>
<bufferName>
Example
TRACe:STAT:MAXimum?
TRACe:STAT:MAXimum? "testData"
Also see
Reading buffers
Remote buffer operation
:TRACe:MAKE
:TRACe:STATistics:AVERage?
:TRACe:STATistics:CLEar

:TRACe:STATistics:MINimum?

:TRACe:STATistics:PK2Pk?
:TRACe:STATistics:STDDev?
:TRACe:STATistics:MINimum?
This command the minimum reading value in the reading buffer.
Type
Query only
Usage
:TRACe:STATistics:MINimum?
:TRACe:STATistics:MINimum? <bufferName>
<bufferName>
2450-901-01 Rev. B/September 2013
Affected by
Recall settings
Instrument reset
Power cycle
A string that indicates the reading buffer; the default buffers
(defbuffer1 or defbuffer2) or the name of a user-defined buffer; if no
buffer is specified, this parameter defaults to defbuffer1
(on page 3-10)
(on page 3-27)
(on page 6-114)
(on page 6-119)
(on page 6-120)
(on page 6-121)
(on page 6-122)
(on page 6-123)
Affected by
Recall settings
Instrument reset
Power cycle
A string that indicates the reading buffer; the default buffers
(defbuffer1 or defbuffer2) or the name of a user-defined buffer; if no
buffer is specified, this parameter defaults to defbuffer1
Section 6: SCPI command reference
Where saved
Not applicable
Returns the maximum reading value in the default
buffer, defbuffer1.
Returns the maximum reading value in the user-defined
buffer testData.
Where saved
Not applicable
Default value
Not applicable
Default value
Not applicable
6-121