Keithley 2450 Reference Manual page 852

Model 2450 Interactive SourceMeter® Instrument Reference Manual
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
CALCulate3 subsystem
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
CONFigure
Model 2400 command
Model 2450 command
Notes
2450-901-01 Rev. B/September 2013
:CALCulate2:LIMit<x>:UPPer[:DATA]
:CALCulate2:LIMit<x>:UPPer[:DATA]?
:CALCulate2:<function>:LIMit<y>:UPPer[:DATA]
<function> is VOLTage[:DC], CURRent[:DC], or RESistance and <y> is
1 or 2.
Note that this only available for two limits in the Model 2450.
:CALCulate2:LIMit<x>:UPPer:SOURce2
:CALCulate2:LIMit<x>:UPPer:SOURce2?
Not available
:CALCulate2:NULL:ACQuire
[:SENSe[1]]:<function>:RELative:ACQuire
is VOLTage[:DC], CURRent[:DC], or RESistance
:CALCulate2:NULL:OFFSet
:CALCulate2:NULL:OFFSet?
[:SENSe[1]]:<function>:RELative
VOLTage[:DC], CURRent[:DC], or RESistance
[:SENSe[1]]:<function>:RELative?
:CALCulate2:NULL:STATe
:CALCulate2:NULL:STATe?
[:SENSe[1]]:<function>:RELative:STATe
VOLTage[:DC], CURRent[:DC], or RESistance
:CALCulate3:DATA?
Not available
Use reading buffers; see the
:CALCulate3:FORMat
:CALCulate3:FORMat?
Not available
Use reading buffers; see the
:CONFigure
:CONFigure?
Not available
Appendix D: Model 2450 in a Model 2400 application
(on page 6-18), where
(on page 6-56), where <function>
(on page 6-55), where <function> is
(on page 6-57), where <function> is
TRACe subsystem (on page 6-107).
TRACe subsystem (on page 6-107).
D-9