Trace:statistics:pk2Pk - Keithley 2450 Reference Manual

Section 6: SCPI command reference
Example
TRACe:STAT:MINimum?
TRACe:STAT:MINimum? "testData"
Also see
Reading buffers
Remote buffer operation
:TRACe:MAKE
:TRACe:STATistics:AVERage?
:TRACe:STATistics:CLEar
:TRACe:STATistics:MAXimum?

:TRACe:STATistics:PK2Pk?

:TRACe:STATistics:STDDev?
:TRACe:STATistics:PK2Pk?
This command returns the peak-to-peak value of all readings in the buffer.
Type
Query only
Usage
:TRACe:STATistics:PK2Pk?
:TRACe:STATistics:PK2Pk? <bufferName>
<bufferName>
Example
TRACe:STAT:PK2Pk?
TRACe:STAT:PK2Pk? "testData"
Also see
Reading buffers
Remote buffer operation
:TRACe:MAKE
:TRACe:STATistics:AVERage?
:TRACe:STATistics:CLEar
:TRACe:STATistics:MAXimum?
:TRACe:STATistics:MINimum?
:TRACe:STATistics:STDDev?
6-122
(on page 3-10)
(on page 3-27)
(on page 6-114)
(on page 6-119)
(on page 6-120)
(on page 6-121)
(on page 6-122)
(on page 6-123)
Affected by
Recall settings
Instrument reset
Power cycle
A string that indicates the reading buffer; the default buffers
(defbuffer1 or defbuffer2) or the name of a user-defined buffer; if no
buffer is specified, this parameter defaults to defbuffer1
(on page 3-10)
(on page 3-27)
(on page 6-114)
(on page 6-119)
(on page 6-120)
(on page 6-121)
(on page 6-121)
(on page 6-123)
Model 2450 Interactive SourceMeter® Instrument Reference Manual
Returns the minimum reading value in the default buffer
defbuffer1.
Returns the minimum reading value in the user-defined
buffer testData.
Where saved
Not applicable
Returns the peak-to-peak reading value in the default
buffer defbuffer1.
Returns the peak-to-peak reading value in the user-
defined buffer testData.
Default value
Not applicable
2450-901-01 Rev. B/September 2013