Tsp Commands; Beeper.beep() - Keithley 2450 Reference Manual

Model 2450 Interactive SourceMeter® Instrument Reference Manual

TSP commands

beeper.beep()

This function generates an audible tone.
Type TSP-Link accessible
Function Yes
Usage
beeper.beep(duration, frequency)
duration
frequency
Details
You can use the beeper of the Model 2450 to provide an audible signal at a specific frequency and time duration.
For example, you can use the beeper to signal the end of a lengthy sweep.
Example
beeper.beep(2, 2400)
Also see
None
2450-901-01 Rev. B/September 2013
Affected by
The amount of time to play the tone in seconds (0.001 to 100)
The frequency of the beep (20 to 8000)
Section 8: TSP command reference
Where saved Default value
Generates a two-second, 2400 Hz tone.
8-7