Keithley 2450 Reference Manual page 851
Interactive sourcemeter instrument
Hide thumbs
Also See for 2450:
- User manual (95 pages) ,
- Application note (6 pages) ,
- Declassification and security instructions (6 pages)
Table of Contents
Advertisement
Appendix D: Model 2450 in a Model 2400 application
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
D-8
Model 2450 Interactive SourceMeter® Instrument Reference Manual
:CALCulate2:LIMit[1]:COMPliance:FAIL
:CALCulate2:LIMit[1]:COMPliance:FAIL?
Not available
:CALCulate2:LIMit[1]:COMPliance:SOURce2
:CALCulate2:LIMit[1]:COMPliance:SOURce2?
Not available
:CALCulate2:LIMit[1]:FAIL?
Not available
:CALCulate2:LIMit[1]:STATe
:CALCulate2:LIMit[1]:STATe?
Not available
To disable source limits, set the limit value to the maximum allowed by the
instrument
:CALCulate2:LIMit<x>:FAIL?
:CALCulate2:<function>:LIMit<y>:FAIL?
VOLTage[:DC], CURRent[:DC], or RESistance
Note that :CALCulate2:LIMit4:FAIL? is not supported (related to contact
check, which is not provided on Model 2450).
Note that this only available for two limits in the Model 2450.
:CALCulate2:LIMit<x>:LOWer[:DATA]
:CALCulate2:LIMit<x>:LOWer[:DATA]?
:CALCulate2:<function>:LIMit<y>:LOWer[:DATA]
<function> is VOLTage[:DC], CURRent[:DC], or RESistance
Note that this only available for two limits in the Model 2450.
:CALCulate2:LIMit<x>:LOWer:SOURce2
:CALCulate2:LIMit<x>:LOWer:SOURce2?
Not available
:CALCulate2:LIMit<x>:PASS:SOURce2
:CALCulate2:LIMit<x>:PASS:SOURce2?
Not available
:CALCulate2:LIMit<x>:STATe
:CALCulate2:LIMit<x>:STATe?
:CALCulate2:<function>:LIMit<y>:STATe
is VOLTage[:DC], CURRent[:DC], or RESistance and <y> is 1 or 2.
Note that this only available for two limits in the Model 2450.
To disable source limits, set the limit value to the maximum allowed by the
instrument.
(on page 6-15), where <function> is
(on page 6-16), where
(on page 6-17), where <function>
2450-901-01 Rev. B/September 2013
Advertisement
Table of Contents
