Display.readingformat - Keithley 2450 Reference Manual

Model 2450 Interactive SourceMeter® Instrument Reference Manual

display.readingformat

This attribute determines the format that is used to display measurement readings on the front-panel display of
the instrument.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
format = display.readingformat
display.readingformat = format
format
Details
this setting persists through reset() and a power cycle
This setting only affects the front-panel display. It does not affect the readings in buffers.
When the prefix option is selected, the display automatically shows in exponent format when the prefix format
does not fit.
Example
display.readingformat =
display.FORMAT_EXPONENT
Also see
None
2450-901-01 Rev. B/September 2013
Affected by
Not applicable
Use exponent format: display.FORMAT_EXPONENT
Use leading zeros: display.FORMAT_PREFIX
Section 8: TSP command reference
Where saved Default value
Nonvolatile display.FORMAT_PREFIX
memory
Change front-panel display to show readings
in exponent format.
8-51