Keithley 2450 Reference Manual page 158

Model 2450 Interactive SourceMeter® Instrument Reference Manual
For additional information about using remote commands for buffer operations, see the following
sections of this manual:
•
Remote buffer operation
•
SCPI commands see
•
TSP command see
Using the front panel to create a user-defined reading buffer:
1. Press the MENU key.
2. Under Measure, select Data Buffers. The MANAGE MEASURE BUFFERS window is displayed.
3. Select New. The keypad is displayed.
4. Enter a name for the buffer you are creating, for example, testData.
5. Select Enter. The Initial Buffer Size window is displayed, showing the default initial buffer size.
2450-901-01 Rev. B/September 2013
(on page 3-27)
TRACe subsystem (on page 6-107)
TSP commands (on page 8-7)
Figure 62: MANAGE MEASURE BUFFERS window
Figure 63: New Buffer Name
Figure 64: Initial Buffer Size window
Section 3: Functions and features
3-13